Function Key Layout; Program Mode - La Crosse Technology WS-8015TWC Instruction Manual

IV.

Function Key Layout

A. The below picture shows the eight function keys used in programming
and operation of your indoor weather station
V.

Program Mode

The program mode is laid out in a manner that allows you to program each
function separately, or you can follow the instructions entirely to program the
indoor weather center. Complete programming is usually done for the initial
set-up, and will require you to skip step 1 and 2 of each programming section.
The programming mode can be exited at any time by either pressing the "CH"
button, or waiting for the 16-second time-out to take effect.
A. Overview of programming mode sequence
Note: If the country setting is other than USA step 8 is city, step 9 is time
zone, etc.
1. Hour 2. Minute
5. Month 6. Date
9. City 10. Time Zone
13. inHg/hPa 14. Relative
pressure setting
17. Storm 18. LCD
alarm on/off contrast
3. 12/24 hour 4. Year
7. Country 8. State
11. DST on/off 12. °F/°C
15. Forecast 16. Storm
sensitivity warning setting
19. LI on/off
8