Troubleshooting - Siemens CM976GK 1 Series User Manual And Installation Instructions

Table of Contents

Advertisement

en Rails
23  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
23.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
1.
Lift the rail forwards
2.
Swivel the entire rail outwards
the rear
​ ⁠ .
23.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
24  Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
30
​ ⁠ and detach it
​ ⁠ .
​ ⁠ and unhook it at
2.
Hook the front retainers in at the bottom and
straighten them
3.
Hook the rear retainers with the hook into the top
hole
​ ⁠ and push them into the bottom hole
23.3 Attaching the rails
1.
Set the rear rail at an angle, hooking it into the re-
tainers at the top and bottom
2.
Pull the rail forwards
3.
Hook in the rail at the front
​ ⁠ .
​ ⁠ .
​ ⁠ .
​ ⁠ .
​ ⁠ and press it down
​ ⁠ .
​ ⁠ .

Advertisement

Table of Contents
loading

Table of Contents