Tools Required For Assembly; Assembly Instructions - Agri-Fab 45-0381 Owner's Manual

AssEMBLY INsTRUCTIONs

TOOLs REQUIRED FOR AssEMBLY

(2) Adjustable Wrench
(2) 3/4" Open or Box End Wrench
(2) 9/16" Open or Box End Wrench
(2) 1/2" Open or Box End Wrench
(1) Pliers
1. Push split bearings (M) into both ends of each double
spool tube. See figure 1.
M
2. Assemble a washer (K), 1.65" spacer (E), a washer (K),
D
1
M
3. Assemble the cross brace, mast extension straps and
CROSS BRACE
4
a spool assembly, a washer (K), a 5.29" spacer (G), a
washer (K), a second spool assembly, a washer (K),
a 2.38" spacer (D) and a washer (K) onto each of the
axles. See figure 2.
K
SPOOL
K
ASSEMBLY
G
AXLE
mast sides together using two category 1 pins (Q), 7/8"
lock washers (R) and 7/8" hex nuts (S). Do not tighten
yet. See figure 3.
S
R
2
K
SPOOL
ASSEMBLY
K
K
E
K
3
MAST SIDE
MAST
EXTENSION
STRAP
Q