Shutdown - Porter-Cable PXCM302 Instruction Manual

A

SHUTDOWN

1. Set the Power Switch to the Off position. (A)
2. Unplug the power cord from the receptacle.
3. Set the outlet pressure to zero on the regulator. (C) Reduce pressure in the tank
through the outlet hose. You can also pull the relief valve ring (D) and keep it open
to relieve pressure in the tank.
4. Remove any air tools or accessories.
5. Open the drain valve allowing air to bleed from the tank. After all of the air has
bled from the tank, close the drain valve to prevent debris buildup in the valve. (E)
WARNING
I
may cause eye injury. Wear safety goggles when opening petcock.
OPERATING INSTRUCTIONS
(see Fig. 5)
Escaping air and moisture can propel debris that
Fig. 5
B
E
11 - ENG
D
C