Troubleshooting; Overview: Troubleshooting; Precautions When Troubleshooting; Solving Problems Based On Symptoms - Daikin RXF50D5V1B Installer's Reference Manual

15 Troubleshooting

15.1 Overview: Troubleshooting

15.2 Precautions when troubleshooting

15.3 Solving problems based on symptoms

15.3.1 Symptom: Indoor units fall, vibrate or make noise

RXF50~71D5V1B
R32 split series
4P519439-15Q – 2021.10
This chapter describes what you have to do in case of problems.
It contains information about solving problems based on symptoms.
Before troubleshooting
Carry out a thorough visual inspection of the unit and look for obvious defects such
as loose connections or defective wiring.
WARNING
▪
When carrying out an inspection on the switch box of the unit, ALWAYS make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.
▪
When a safety device was activated, stop the unit and find out why the safety
device was activated before resetting it. NEVER shunt safety devices or change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.
DANGER: RISK OF ELECTROCUTION
WARNING
Prevent hazards due to inadvertent resetting of the thermal cut-out: power to this
appliance MUST NOT be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly turned ON and OFF by the utility.
DANGER: RISK OF BURNING/SCALDING
Possible causes
The indoor units are not installed
securely
15 Troubleshooting
|
Corrective action
Install the indoor units securely.
Installer reference guide
63