Table of Contents
Advertisement
Getting started
Using the built-in TV tuner
Note that the input function must be set to DVD or HDD
in order to change TV channels or audio channel playback.
Changing TV channels
There are three different ways to select TV channels. Note
that you can't change TV channels during playback,
recording or during recording standby.
• CHANNEL +/– buttons on the remote
• Number buttons on the remote – For example, to
select channel 4, press 4 then ENTER; for channel 34,
press 3, 4, ENTER.
• –/
+/
buttons on the front panel
Note
• Channel presets are numbered 1–99.
Changing audio channels
You can change the audio channel of the broadcast or
external input signal.
AUDIO
•
Press AUDIO to change the audio.
The current audio channel is displayed on-screen.
CHANNEL
ENTER
• If the NICAM audio setting (see NICAM Select on
page 105) is set to NICAM and you are watching a
NICAM broadcast, you can switch between NICAM
and Regular (non-NICAM) audio.
NICAM
Regular
• If the NICAM broadcast is bilingual, you can also
select the language.
NICAM A
Regular
• You can also select the language for a non-NICAM
bilingual broadcast.
A (L)
A + B (L+R)
• Some TV programs are broadcast with both a main
and a Second Audio Program (SAP).
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
Mono
Stereo
• When watching a recording made from an external
input with Bilingual recording selected (see External
Audio on page 105), you can switch the audio
channel between left (L), right (R) or both (L+R).
L
L+R
Note
• When recording to the HDD, or in Video mode, or in
VR mode using the FINE/MN32 setting, only one
channel of a bilingual broadcast is recorded. In this
case, decide which language you want to record
before recording by setting the Bilingual Recording
setting (see Bilingual Recording on page 105).
• In VR mode (excluding FINE/MN32 recordings), both
channels of a bilingual broadcast are recorded. If
SAP is selected then both SAP and mono channels
are recorded.
• In Video mode, or if the recording mode is FINE/
MN32, only one channel of a bilingual broadcast is
recorded. In this case, decide which language/audio
program you want to record before recording by
NICAM B
NICAM A+B
B (R)
SAP
R
03
23
En
Advertisement
Table of Contents
