Changing The Temperature For Dhw; Changing The Operating Program/Operating Mode; Calling Up The Solar Yield; Calling Up The Wifi Status - Viessmann VITODENS 200-W Operating Instructions For The System User

Changing the temperature for the current...
3. to select the set value for the current tem-
perature level.
4. OK to confirm

Changing the temperature for DHW

You can change the set temperature in the selected
temperature level for DHW heating.
To do so, you must be on the home screen.
Tap the following buttons:
1. for "DHW".

Changing the operating program/operating mode

You can change the operating program.
To do so, you must be on the home screen.
Tap the following buttons:
1. for "Operating mode"
2. OK to confirm
3. to select the required operating program.
4. OK to confirm

Calling up the solar yield

You can call up the solar yield for different time peri-
ods.
To do so, you must be on the home screen.
Tap the following buttons:
1. for "Solar"

Calling up the WiFi status

You can call up the status of your internet connection.
To do so, you must be on the home screen.
Tap the following buttons:
1. for "WiFi"

Calling up the system pressure

You can display the system pressure.
(cont.)
5. to exit the menu.
2. OK to confirm
3. to select the set temperature.
4. OK twice to confirm
5. to exit the menu.
5. to exit the menu.
If you have configured other hydraulic functions, the
relevant hydraulic component will be added to the dis-
play.
Example:
You have configured 2 heating circuits and DHW.
On the display, you can select "On" or "Off" for each
hydraulic component (heating circuit 1, heating
circuit 2, DHW).
2. OK to confirm
3. to see the required information.
4. to exit the menu.
2. OK to confirm
3. for more information
4. to exit the menu.
To do so, you must be on the home screen.
Quick view
19