Operating program
Operating program
DHW heating
"DHW" "ON"
"DHW" "OFF"
System
"Entire system" "ON"
"Entire system" "OFF"
Special operating programs and functions
"Screed drying"
■
This function is switched on by your contractor. Your
screed is dried in line with a set time program (tem-
perature/time profile) suitable for the relevant build-
ing materials. Your settings for central heating have
no effect on the duration of screed drying (max. 32
days). The system no longer provides DHW heating.
The "Screed drying" function can be altered or
switched off by your contractor.
■
"External hook-up"
The operating program set at the control unit was
changed over by an external device, e.g. an EM-EA1
extension (DIO electronics module). The operating
program cannot be changed via the control unit for
as long as the external hook-up is enabled.
(cont.)
Function
DHW is heated in accordance with the DHW temperature and time
program specified (see chapter "DHW heating").
No DHW heating
■
Frost protection for the DHW cylinder is active.
■
Your home is heated in accordance with the specified room tem-
■
perature or flow temperature and the time program (see chapter
"Central heating").
Note
In room temperature-dependent operation, a time program for
central heating can only be set at the room temperature control-
ler: See the operating instructions for the room temperature con-
troller.
DHW is heated in accordance with the DHW temperature and
■
time program specified (see chapter "DHW heating").
No central heating
■
No DHW heating
■
Frost protection for the heat generator and the DHW cylinder is
■
active.
Only for weather-compensated operation and con-
■
stant operation:
"Holiday": See page 29.
■
Only for weather-compensated operation and con-
stant operation:
"Day(s) at home": See page 27.
Note
In the system overview you can call up the active oper-
ating program: See page 18.
Operation
17