Clifford bULLET II Owner's Manual page 7

Standard Features of the Bullet II
Enhanced User-Selectable AutoArming™
"passively" if you forget. May qualify you for an insurance discount that
could pay for the system (consult your insurance company).
AutoArming Enable/Disable
AutoArming with just a few flicks of a switch.
— You may set the system to automatically lock the
AutoArm & Lock™
doors every time the system AutoArms.
— Two parking lights flashes signal that the
Visual Indication
30-second countdown to AutoArming has started.
Instant AutoArm Bypass
will bypass AutoArming for one cycle — perfect when fueling the
vehicle. The AutoArming feature is automatically restored the next
time you park your vehicle.
Smart Remote Trunk Release Capability
that the optional remote trunk release can be activated only when the
system is disarmed. To further prevent any possibility of unintentional
opening of the trunk, the interlock also makes sure that the trunk release
cannot be remotely activated while driving.
Patented Smart AutoTesting™
and sensors every time you remotely arm and warns you if you
accidentally arm your Bullet II system with the hood or trunk open. If
there is a genuine trigger or sensor malfunction, the system will
specifically identify the problem, thereby eliminating time-consuming
and costly trouble-shooting.
Patented Malfunction AutoBypass™
or sensor malfunction, your Bullet II will automatically bypass the
malfunction and arm all other points to continue relentless protection of
your vehicle.
— Bullet II's memory stores the identity of the last trigger
TotalRecall™
or sensor activated. This provides an invaluable diagnostic means, since,
whenever you wish, the system will visually identify the last activated
trigger or sensor.
— Automatically arms itself
— You may disable or re-enable
— Just two a quick turns of the ignition switch
— An electronic interlock assures
—Automatically tests all system triggers
—In the unlikely event of a trigger
5
(cont.)