Standard Features of the Bullet II —For as long as you own the vehicle, Clifford will Lifetime Warranty repair or replace the control unit and remote controls free of charge (see warranty card for full details). — One of many patented Clifford FACT™—False Alarm Control and Test...
Page 6
— If you park and forget to turn off the headlights, Headlight Reminder your Bullet II reminds you to turn them off before you leave the vehicle. Remote Window/Sunroof Closure Capability (including several models of Mercedes Benz, Jaguar, Volkswagen and BMW), the system’s integrated channel 6 timer and an optional relay can...
Page 7
Patented Smart AutoTesting™ and sensors every time you remotely arm and warns you if you accidentally arm your Bullet II system with the hood or trunk open. If there is a genuine trigger or sensor malfunction, the system will specifically identify the problem, thereby eliminating time-consuming and costly trouble-shooting.
Page 8
Bullet II, a special chirp and parking light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away. Your Bullet II will even identify the specific trigger or sensor that detected the intrusion attempt.
(this works better than holding the button down). The 4-button/12-channel remote control is the key to your system. It has Clifford’s Anti-CodeGrabbing™ (ACG) technology for the ultimate protection against “code-grabbing” devices (see page 10). You will use your remote control to...
Page 10
What each button/channel does Your Bullet II remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 15-16). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
7) can activate accessories such as the IntelliStart remote engine starter, remote power window control, electric garage door and entry gate opener(s), Bullet II systems on your other vehicles, etc. What about channel 5? ..
Thus the code recorded and played back by the thief’s code-grabber will never be accepted by your Bullet II. Only ACG can make a car alarm impervious to code-grabbing, and only Clifford systems have ACG with Random Code Encryption.
Press button 1 again and the doors lock (two flashes). Selectable starter/ignition interrupt At the time of installation, you can select whether your Bullet II interrupts the starter line or the ignition line. The starter/ignition interrupt will be set in either Fault-Proof mode, which lets you start the engine even in the unlikely event of a complete system failure, or Super-Security mode that ensures a thief won’t be able...
(highly recommended for convertibles and other soft-top vehicles). Smart AutoTesting™ Each time you remotely arm your Bullet II, it automatically performs an extensive test of all system triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood or trunk and re-arm to reactivate monitoring of that trigger point).
Authorized Clifford Dealer. TotalRecall™ The system’s memory records the identity of the last activated or malfunctioning trigger or sensor, which allows your installer to instantly track down a malfunction.
Bullet II Headlight Reminder feature. See User-selectable features on pages 15-16. High-output Six-Sound Siren Six different alarm sound patterns to draw even more attention. Your Bullet II also provides these additional features: You can control the volume of the normal arm and disarm QuietChirps: chirps.
User-selectable features Your Bullet II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page.
Page 18
# of Factory Feature momentary setting presses Add a new remote to channel 2 — Press remote control button 2 (remote accessory) Add a new remote to channel 3 — Press remote control button 3 (silent arm/disarm) Add a new remote to channel 4 —...
Turn the ignition off. That’s all there is to it! To change the Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself.