Headlight Reminder; High-Output Six-Sound Siren; Quietchirps; Long-Term Chirp Silencing - Clifford bULLET II Owner's Manual

Headlight Reminder

If you turn the ignition off and open the driver's door to exit the car without having
turned off the headlights, you will be reminded to turn them off with a distinctive
rapid, multi-chirp warning. If your vehicle already has a similar warning feature,
you may turn off the Bullet II Headlight Reminder feature. See User-selectable
features on pages 15-16.

High-output Six-Sound Siren

Six different alarm sound patterns to draw even more attention. Your Bullet II also
provides these additional features:
You can control the volume of the normal arm and disarm

QuietChirps:

chirps. As shipped from the factory, your system issues full-volume chirp
acknowledgments. If you prefer, you may reduce the chirp volume to a level
that is clearly audible, yet less obtrusive. See the User-selectable features
section on pages 15-16.

Long-term chirp silencing:

II's arm and disarm chirps until you decide to restore them. The parking light
flashes will continue to provide visual confirmation of remote controlled
arming and disarming. See User-selectable features on pages 15-16.

Remote controlled chirp muting:

are especially valuable when parking late at night in a quiet residential area or
any other time when you want to arm or disarm silently. To arm or disarm
silently, simply press button 3 on your remote control instead of the usual
button 1.
When the system detects an intrusion attempt, the alarm is set

Siren duration:

to sound for 30 seconds. However, if you prefer, you may change it to 60
seconds. See the User-selectable features section on pages 15-16.
SmartPowerUp™ II
If power to the system is ever removed, SmartPowerUp II ensures the system will
automatically restore itself to its previous state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the system
will re-arm and instantly sound the siren while immobilizing the vehicle. If your
vehicle is to be serviced by a mechanic, just put the system in valet mode via the
remote control (see Remote controlled valet mode entry and exit on page 11). If the
mechanic needs to interrupt power, your system will automatically return to its valet
mode state when power is restored; there will be no alarm activation and no need to
provide your mechanic with your remote control and instructions on how to use it.
Whenever you wish, you may silence your Bullet
Remote controlled chirp muting capabilities
14