How To Operate The Premier™ Remote Control; How To Disarm The System With The Remote Control - Clifford AvantGuard II Owner's Manual

How to Operate the Premier™ 4x8 Remote Control
The Premier 4-button/8-channel, 4-billion code remote control provides incredibly
high digital code security to give you the ultimate in protection against professional
thieves using digital code scanners. Even a thief equipped with the most sophisti-
cated scanning device would need more then 19 years to decipher your system's
security code.
What's more, the remote control's four buttons and eight different channels enables
you to remotely command any aspect of the AvantGuard II and its optional accesso-
ries. It is also capable of controlling AvantGuard II, IntelliGuard Series and Clifford
Nova, Delta IV and Ace II systems and accessories on other vehicles you own — up
to a total of eight with just one remote control.
With the remote control microswitch in the up position, buttons I-IV transmit
channels 1-4; in the down position, the same buttons transmit channels 5-8.
The remote control has a typical range of 300 feet. Certain factors—such as terrain,
physical obstructions, weather conditions or a weak remote control battery—may
effect the range. Button I (channel 1) will arm/disarm and simultaneously lock/un-
lock the car doors for you and your passengers. If you press button I (channel 1) for
3 seconds, it will sound the siren and flash the parking and interior lights (see How
to Panic the System, page 4). Button II (channel 2) will start or shut down the engine
and all preset accessories. Optionally, channels 3-8 can individually command
SmartWindows II, a remote trunk release, electric garage doors and/or Clifford
systems on your other vehicles. Ask your Authorized Clifford Dealer about these
options.

How to Disarm the System with the Remote Control

With the remote control microswitch in the up position, button I (channel 1) will
always arm or disarm the system:
1. Press remote control button I/channel 1.
2. Simultaneously, several actions will take place to confirm remote disarming:
The siren will chirp once, providing audible confirmation from a distance. (If
you prefer, you can turn off the chirp acknowledgements (see page 7 for details).
The parking lights will flash once, providing visual confirmation from a
distance.
The car doors will automatically unlock for you and your passengers.
For your safety and convenience, the interior courtesy light will turn on if the
engine is off, allowing you, at night, to check inside the car before entering.
The MultiColor LED inside the car will turn off. (The LED will begins flashing
green when the interior light turns off, indicating you have 30 seconds to enter
the vehicle or it will automatically re-arm; see Smart AutoArming on page 6.)
3. Release button I as soon as you observe any of the above actions.
4. Enter the vehicle. For your convenience, the interior light will remain on until
you start the engine, or for 30 seconds, whichever occurs first.
3