Battery Tool Use And Care; Service; Appliance-Specific Safety Instructions For Hand Grinders/Polishers - Parkside PAAP 12 C3 Translation Of The Original Instructions

g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unex-
pected situations.

5. Battery tool use and care

a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C (265°F) may
cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
PAAP 12 C3
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
ble battery from heat, for example from
continuous exposure to sunlight, fire, water
and moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Appliance-specific safety instructions
for hand grinders/polishers
General safety instructions for polishing and
sandpaper sanding
(a) This power tool is to be used as a polisher and
sandpaper sander. Please follow all safety
instructions, instructions, diagrams and data
that you receive with the power tool. Failure
to follow the instructions below may result in
electric shock, fire and/or serious injury.
b) This power tool is not suitable for cutting,
roughing and wire brushing. Using the power
tool for applications for which it is not designed
can lead to hazards and injuries.
c) Do not use any accessories that have not
been specifically provided or recommended
for this power tool by the manufacturer. Just
because you can attach the accessories to your
power tool, does not ensure they are safe to
use.
d) The maximum speed of the accessory tool
used must be at least as high as the maximum
speed specified for the power tool.
Accessories that rotate faster than the maximum
permissible rate can break and throw pieces
into the air.
Protect the rechargea-
GB │ IE │ 5 ■