Shrouds - Schwinn 190 Service Manual

NOTICE: It is necessary to adjust the Magnetic Resistance Sensor at the end of this procedure. Refer to the "Adjust the
Note: Your machine may not match the image. For reference only.
1.
Unplug the AC Adapter from the wall outlet and
machine.
2.
Flex the edges of the Top Shroud to disengage the
inside tabs from the Main Assembly. Carefully rotate the
Shroud on the Console Mast to get access to the Main
Shroud screws.
Note: It may be easier to pry up the edges of the Top
damage to the surface of the Shrouds, we
recommend putting a piece of cloth over the
screwdriver blade.
3. Using a #2 Phillips Screwdriver, remove 3 screws (a) that
attach the Crank Disc to the Left Main Shroud. Set them
safely aside for reassembly.
Rotate top shroud
Left side (Top shroud and pedal not shown for clarity)
a
76
disc
Main
shroud