Advertisement
INSTALLER'S GUIDE
Section 3. Installation
Step 1 - Remove the filter box door and slide the
filter out of the filter box.
NOTE: A 2" filter cannot be used if also installing
a BAYWMKIT001. This wall mount kit has a flange
which will interfere with a 2" filter. The flange does
not have an effect on the 1" filter.
Step 2 - Optional - If installing a two inch media filter,
remove the four screws on the sides of the filter box
and then remove the two vertical filter guides.
Apply the gasket material to create a seal between
the air handler and the filter box
Step 3 - Apply the gasket material to the outer edges
of three sides of the filter box. The fourth side should
follow along next to the flange.
Step 4 - Apply a second piece of the gasket material
along the side with the flange so that the gasket will
have double the thickness on this one side only.
Page 2
Advertisement
