ADC HiGain HRU-402 User Manual page 43

150-402-100-03
2 View the HRU-402 system settings.
3 Type E
Table 8 on page 35
Table 8. System Settings Fields and Descriptions
Field Description
Time Time of day when System Settings were checked.
Date Date when System Settings were checked.
Equalization Indicates settings for equalizer of either EXT, 0 (DSX-1 for 0-133 ft),
133 (DSX-1 for 133-266 ft), 266 (DSX-1 for 266-399 ft),
399 (DSX-1 399-533 ft), 533 DSX-1 for 533-655 ft).
SmartJack Indicates settings of either ENA or DIS for SmartJack Loopback: where
LPBK signal from DS-1 is looped back at the HRU to the DSX-1.
Special LBPK Indicates the special loopback settings of either: Generic loopback
(GNLB), where the HiGain system responds to the generic in-band
loopback codes, or A1LB and A2LB, A3LB, A4LB, or A5LB.
Power Indicates whether power feed to the HRU-402 from the HLU is either
DISABLED, LOW, AUTO, or HIGH.
ZBTSI Indicates whether ZBTSI is either On or Off. An On setting tells the system
that the ESF frame is operating in its ZBTSI mode. An Off setting tells the
system that the ESF frame is operating in its normal non-ZBTSI mode.
BER Thresh
Indicates whether the Bit Error Rate threshold is set to either 10
(BERT) Alarm
or None.
Loopback Indicates one of four settings: None (DIS automatic time-out cancellation
Timeout of all loopbacks) or a choice of either 20, 60, or 120, which sets
automatic cancellation (timeout) of all loopbacks to either 20, 60 or 120
minutes after initiation.
Alarm Indicates whether alarms are enabled or DIS.
DS-1 Line Indicates one of three settings: Auto, B8ZS, or AMI.
Code
Framing Indicates whether framing is either Auto or UNFR (unframed).
HRU-402 List 1 and List 3
to exit and return to the previous screen.
lists the System Settings fields and descriptions.
November 5, 1998
Using the Maintenance Terminal
Continued
-7 -6
, 10 ,
35