150-402-100-03
C
ONNECTING TO A
This section covers the remote terminal screens for both non-doubler and
doubler applications. The 9-pin craft port (RS-232 dB-9 connector) on the
HRU-402 front panel allows you to use a RS-232 cable to connect your
system to an ASCII terminal or a PC running a terminal emulation program.
Once connected, you can access the Remote Terminal menu.
To connect a terminal emulator:
1
Connect a standard, 9-pin, serial terminal cable to the Craft port
(RS-232 dB-9 connector) on the HRU-402.
HRU-402, dB-9, and two types (dB-9 and dB-25) of RS-232 I/O
interfaces on the HLUs.
Figure 7. dB-9 and dB-25 RS-232 I/O Interfaces
HRU-402 List 1 and List 3
T
ERMINAL
November 5, 1998
E
MULATOR
Figure 7
shows the
Installation
23