System Settings; System Settings Screen - ADC HiGain HRU-402 User Manual

Using the Maintenance Terminal

System Settings

The System Settings screen allows you to analyze and view configurable
parameters.
Provisioning from the remote is allowed when connected to
particular HiGain line units. See the HiGain Line Unit user
manual to determine whether remote provisioning is allowed.
1 Type C
Settings screen
The HRU-402 System Settings screen will appear different
from the screen shown below if the HRU-402 is locally logged
in.
TIME: 03:40:57
DATE: 10/04/98
EQUALIZATION....: 0
SMART-JACK LPBK.: ENABLED
SPECIAL LPBK....: GNLB
POWER...........: AUTO
ZBTSI...........: OFF
BER ALARM THRESH: NONE
LOOPBACK TIMEOUT: NONE
ALARM...........: DISABLED
DS1 LINE CODE...: AMI
FRAMING.........: AUTO
AIS ON HDSL LOSW: 2 LOOPS
AIS ON SMJK/NREM: ENABLED
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
34
from the Remote Terminal Main menu to view the System
(Figure 12 on page
DS0 BLOCKING: xx = Blocked Channels
Figure 15. System Settings Screen
November 5, 1998
29):
SYSTEM SETTINGS
CIRCUIT ID#:
MARGIN ALARM THRESH: 4
RLOS(DS1 LOS) ALARM: ENABLED
ALARM PATTERN......: AIS
BPVT...............: ENABLED
(E)xit
150-402-100-03
HRU-402 List 1 and List 3