JVC KD-SX60WT Service Manual page 8

3.1.7 Removing the CD mechanism assembly
(See Fig.7)
• Prior to performing the following procedure, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink, rear bracket and main board.
(1) Remove the three screws H attaching the CD mechanism
assembly to the top chassis.
3.1.8 Removing the front board
(See Figs. 8 to 10)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws J on the back side of the front pan-
el assembly. (See Fig.8.)
(2) Release the fourteen joints f attaching the rear cover to the
front panel assembly. (See Fig.9.)
(3) Take out the front board from the front panel assembly.
(See Fig.10.)
1-8 (No.49868)
CD mechanism assembly
Fig.7
Front panel assembly
J
Fig.8
Joints f
Front panel assembly
Rear cover
Joints f
Fig.9
Front board
Fig.10
H
Top chassis
H
J
J
Joints f
Joints f
Front panel assembly