Remote Connection To The System; Protecting The System From Unauthorized Access; Setting Up Port Forwarding; Choosing An Appropriate Client - Bosch DIVAR IP all-in-one 7000 2U User Manual

12 en | Remote connection to the system
6

Remote connection to the system

This section describes the steps that are required to access the DIVAR IP system from the
internet.
6.1

Protecting the system from unauthorized access

In order to protect the system from unauthorized access, we recommend that you follow
strong password rules before connecting the system to the internet. The stronger your
password, the more protected your system will be from unauthorized persons and malware.
6.2

Setting up port forwarding

In order to access a DIVAR IP system from the internet through a NAT/PAT capable router, port
forwarding must be configured on the DIVAR IP system and on the router.
To set up port forwarding:
4
–
–
The DIVAR IP system is now accessible from the Internet.
6.3

Choosing an appropriate client

This chapter describes the ways that allow remote connection to a DIVAR IP system through
the internet.
There are 2 ways to make a remote connection:
–
–
Notice!
i
Only use BVMS Operator Client or Video Security App in the version that matches DIVAR IP.
Other clients or application software may work but are not supported.
6.3.1

Remote connection with Operator Client

To make a remote connection with BVMS Operator Client:
1.
2.
3.
6.3.2

Remote connection with Video Security App

To make a remote connection with Video Security App:
1.
2.
3.
4.
5.
6.
2021.10 | V02 | DOC
Enter following port rules in the port forwarding settings of your internet router:
port 5322 for SSH tunnel access using BVMS Operator Client.
port 443 for HTTPS access to VRM using Video Security Client or Video Security App.
Remote connection with Operator Client, page 12 .
Remote connection with Video Security App, page 12 .
Install BVMS Operator Client on the client workstation.
After finishing the installation successfully, start Operator Client using the desktop
shortcut .
Enter the following, then click OK.
User name: admin (or other user in case one is configured)
Password: enter user password
Connection: ssh://[public-IP-address-of-DIVAR-IP_all-in-one]:5322
In Apple's App Store search for Bosch Video Security.
Install the Video Security app on your iOS device.
Start the Video Security app.
Select Add.
Enter the public IP address or dynDNS name.
Make sure Secure Connection (SSL) is switched on.
DIVAR IP all-in-one 7000 2U | DIVAR IP all-in-one
User manual
7000 3U
Bosch Security Systems B.V.