First Logon And System Setup - Bosch DIVAR IP all-in-one 7000 2U User Manual

DIVAR IP all-in-one 7000 2U | DIVAR IP all-in-one
7000 3U
4

First logon and system setup

Notice!
i
We strongly recommend not changing any operating system settings. Changing operating
system settings can result in malfunctioning of the system.
Notice!
i
To perform administrative tasks, you have to log on to the administrator account.
Notice!
i
In case of password loss a system recovery must be performed as described in the
installation manual. The configuration must be done from scratch or must be imported.
To setup the system:
1.
2.
3.
4.
5.
6.
7.
8.
Bosch Security Systems B.V.
Connect the DIVAR IP all-in-one 7000 unit and the cameras to the network.
Turn on the unit.
Setup routines for Microsoft Windows Server IoT 2019 for Storage Standard are
performed. This can take several minutes. Do not turn off the system.
After the process is completed, the Windows language selection screen is displayed.
Select your country/region, the desired operating system language and the keyboard
layout from the list, then click Next.
The Microsoft Software License Terms and the EULA (End User License Agreement) are
displayed.
Click Accept to accept the license terms and wait until Windows restarts. This can take
several minutes. Do not turn off the system.
After the restart, the Windows logon page is displayed.
Set a new password for the administrator account BVRAdmin and confirm it.
Password requirements:
– Minimum 14 characters.
– At least one upper case letter.
– At least one lower case letter.
– At least one digit.
Then press ENTER.
The Software Selection page is displayed.
Click the DIVAR IP Software Center installation file.
The DIVAR IP Software Center installation starts. After the installation is completed,
Windows restarts and you are directed to the Windows logon page.
Note: If you do not have the DIVAR IP Software Center installation file stored on a local
drive, insert a storage media (USB flash drive, DVD-ROM) with the installation file.
The storage media is automatically scanned for the DIVAR IP Software Center installation
file and the installation file is displayed on the Software Selection page.
Log on to the administrator account.
The Microsoft Edge browser starts automatically.
Enter the administrator user name BVRAdmin and its password, then click Sign in.
DIVAR IP Software Center starts and the software packages are loaded.
Note: If the respective software packages for the desired operation mode are not
User manual
First logon and system setup | en
2021.10 | V02 | DOC
7