Connection; Connecting The Expansion Units - Bosch DSA-N2E8X4-12AT Quick Installation Manual

16 en | Connection
5

Connection

5.1

Connecting the expansion units

The expansion units are shipped with the appropriate number of SAS cables.
To connect the components:
4
One expansion unit - single controller configuration
Controller A
IOM A
One expansion unit - dual controller configuration
(recommended cabling for maximum throughput)
Controller A
IOM A
Three expansion units - dual controller configuration
Controller A
IOM A
IOM A
IOM A
2017.12 | V1 | DOC
Connect the SAS cable from the SAS port on the controller unit to the SAS port on the
expansion unit.
IOM B
Controller B
IOM B
Controller B
IOM B
IOM B
IOM B
Quick Installation Guide
DSA E-Series (E2800 12-bay)
Bosch Sicherheitssysteme GmbH