Upgrading And Updating Software - Bosch DIVAR IP all-in-one 7000 2U User Manual

DIVAR IP all-in-one 7000 2U | DIVAR IP all-in-one
7000 3U
5

Upgrading and updating software

With DIVAR IP Software Center you can update and upgrade the installed software.
You can find the latest software and available upgrade packages in the Download Area of
Bosch Security and Safety Systems under:
https://downloadstore.boschsecurity.com/
Upgrading software
To upgrade the installed software:
1.
2.
3.
4.
Updating software
To update the installed software:
1.
2.
3.
4.
Bosch Security Systems B.V.
Download the desired software packages from the Download area and save them either
on a local drive or on a storage media. Then connect the storage media to your system.
Start DIVAR IP Software Center.
The Installed software page is displayed.
In the Upgrades section, the available upgrades are displayed. Click Upgrade to upgrade
the desired software.
The Upgrade dialog box is displayed showing the software packages included in the
upgrade.
Note: The upgrade will save all your settings, update the software and restart the system.
Click Install to continue.
The installation of the software packages starts. This can take several minutes. Do not
turn off the system and do not remove the storage media.
After the installation is completed, the system restarts.
Download the desired software packages from the Download area and save them either
on a local drive or on a storage media. Then connect the storage media to your system.
Start DIVAR IP Software Center.
The Installed software page is displayed.
In the Updates section, the available updates are displayed. Click Update all to update all
software packages to the new version.
The Update dialog box is displayed showing the software packages, which will be
updated.
Note: The update will save all your settings, update the software and restart the system.
Click Install to continue.
The installation of the software packages starts. This can take several minutes. Do not
turn off the system and do not remove the storage media.
After the installation is completed, the system restarts.
User manual
Upgrading and updating software | en
2021.10 | V02 | DOC
11