8
en | First logon and system setup
4.1
Choosing operation mode
In the DIVAR IP Software Center application you must choose the desired operation mode to
configure your DIVAR IP all-in-one 7000 system.
Notice!
i
Changing the operation mode after installation requires a full factory reset.
1
1
2
Refer to
–
4.1.1
Operating as full video recording and management system
To operate the DIVAR IP system as full video recording and management system:
1.
2021.10 | V02 | DOC
available on a local drive, insert a storage media with the software packages to proceed
with the system setup.
You can find the latest software and available upgrade packages in the Download Area of
Bosch Security and Safety Systems under:
https://downloadstore.boschsecurity.com/
2
Selection window
Main window
Operating modes, page 5
In the selection window, click BVMS.
The software components, which will be installed, are displayed in the main window.
DIVAR IP all-in-one 7000 2U | DIVAR IP all-in-one
User manual
7000 3U
Bosch Security Systems B.V.