Setting The Banner; Charging The Batteries - Kyocera QCP 1960 User Manual

Press or
5.
(resets to never when you unlock), and never.
Press or
6.
To unlock the phone
To unlock the phone, press

Setting the banner

The banner is a 12-character display that appears on the screen during power up and
standby.
To change the banner
Press or
1.
Select Display.
2.
Select Banner.
3.
(Optional) If a banner exists, press
4.
Enter the characters you want to appear in the banner (for example, your name).
5.
Enter characters the same way you do for the phone book. (See "Saving a name with
a number" on page 17.)
Press or
6.

Charging the batteries

Your phone comes with a rechargeable internal lithium ion (LiIon) battery, which you do
not need to remove to charge.
This LiIon battery is partially charged when you receive the phone. Fully charge the
battery as soon as you can to maximize talk time. If the charge falls too low, the phone
turns off without saving any functions in progress.
Your phone may come with either an AC Adaptor or a Global Travel
Charger (like the example shown here).
Plug the charger into the phone and into a wall outlet to charge the
battery. The quickest way to charge the battery is to turn the phone off
while it is connected to the charger.
While the battery is charging, the icon continues to scroll. Do not use
your phone while it is charging.
If you have attached an external battery to the phone, the AC Adaptor or Global Travel
Charger recharges the internal battery first (to a level of 90%), then recharges the external
battery (to 90%). The charger then tops off the internal battery and external battery to
100%. However, it is not necessary to wait until all batteries reach 100% before using
your phone.
Note—While you are using an AC Adaptor, the phone will not make analog calls.
User's Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
under [NEXT] to scroll through these settings: on power up, now
under [OK] to select the setting you want to use.
or
under [MENU].
under [SAVE] to save the banner.
under [UNLOCK] and enter your lock code.
or under [EDIT].
S029_
9