Quick Start - Kyocera QCP 1960 User Manual

Quick Start

To turn on your phone
Press or
pwr
(its idle state).
To unlock your phone
If your phone is locked, press
The default lock code is usually either 0000 or the last four digits of your phone number.
To charge your battery
Plug the AC Adaptor or Global Travel Charger into the phone and into a wall outlet.
To make a call
Turn on the phone.
1.
Dial the number on the keypad, then press
2.
To answer a call
When the phone rings, press
except ,
END
pwr
To end a call
Press .
END
To save a number in the phone book
Enter the number you want to save.
1.
Press or
2.
To speed dial a phone number
Enter a memory location from the phone book.
1.
Press or
2.
SEND TALK
To redial the last number called
Press or
SEND TALK
User's Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
until the icon appears on the screen. The phone enters standby mode
SEND
or , or the volume keys.
under [SAVE] and follow the directions on the screen.
.
.
or under [UNLOCK] and enter your lock code.
or
SEND
TALK
or to answer. In standby mode, press any key
TALK
.
3