Icons On The Screen; Using Smart Keys - Kyocera QCP 1960 User Manual

Press Information to see your phone number or enter punctuation marks and
8
pauses.
Press Scroll Down to scroll through menus and screens. When editing text,
9
press it to move the cursor to the right.
(860/1960)
10
pwr
Press Clear once to erase the last character. Press and hold to erase all
1 1
C
characters. In menus, press this key to return to the previous menu level.

Icons on the screen

Your phone has a five-line screen. On the top line, the following icons appear:
Digital Mode means the phone is operating in CDMA digital mode.
Signal Strength shows current signal strength. The more lines you see, the stronger
the signal. When this icon appears, you can make and receive calls.
No Signal means the phone is not receiving a signal from the system. You cannot
make or receive calls. Wait a little longer or move to an open area.
On Call means a call is in progress.
Roaming means the phone is outside of its home area.
Envelope indicates a text message, voice mail, or a page.
Padlock indicates your phone is operating with enhanced CDMA voice privacy (if
available from your service provider). When this icon appears over the left
key, keyguard is on.
Battery Charge shows how much power remains in the battery. The more black
bars you see, the greater the charge. (For more information, see page 9.)

Using Smart Keys

Smart Keys (860/1960) or
(See the diagram on page 6.) Smart Keys change function based on the screen you are
using. The word above each Smart Key identifies its current function. In standby mode,
the Smart Keys are [MENU] and [BOOK]. Once you press either key, other words may
appear.
User's Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
(2760) Press and hold Power to turn the phone on or off.
(2760) are the two unlabeled keys below the screen.
or
7