Kyocera QCP 1960 User Manual page 38

sets key beep length.
5 4 Beep Length
enables dialing by pressing a single key. (See "One-touch dialing" on
5 5 One-Touch
page 20.)
sets options controlling the appearance of the screen.
6 Display
illuminates the phone screen and keypad. You can set how long the
6 1 Backlight
backlight remains on. Select "always off" to extend the battery's charge.
Note—The phone's backlight is not on when it is attached to accessories, except for the
Hands-free Car Kit.
sorts phone book entries alphabetically or by location number.
6 2 Sort Book
lets you enter text (up to 12 characters) to appear on the screen during power
6 3 Banner
up and standby.
displays the date and time during standby mode.
6 4 Show Time
hyphenates phone numbers according to the North American
6 5 Auto Hyphen
numbering plan.
displays the software version and product model of your phone. Press
6 6 Version
under [MORE] for more information, such as your electronic serial number
(ESN).
sets the language for the phone. (See page 18.)
6 7 Language
displays the current charge level of each battery and indicates which battery
6 8 Battery
is currently in use.
control how the phone notifies you of calls and messages.
7 Alerts
causes the phone to beep and show a message when a call is dropped.
7 1 Call Drop
causes the phone to beep ten seconds before each minute during a call. This
7 2 Minute
helps you track your phone use.
tells the phone to beep when a network parameter changes. For instance, it
7 3 Service
beeps if you move out of your service area or if the call changes from digital to analog
service.
assigns a distinct ring to incoming calls that occur when you are outside
7 4 Roam Ring
your service area.
sets the automatic voice mail message reminder beep on or off. When
7 5 Msg Remind
Msg Remind is on, the phone beeps every five minutes when you have a voice mail
message that you have not yet acknowledged. When you acknowledge the message,
the Msg Remind beep stops until you get a new voice mail message.
allows you to set network options.
8 System
determines which signals your phone will accept.
8 1 Set Service
(the recommended setting) accepts any system the phone service
Automatic
provides.
User's Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
or
33