Using Keyguard; Locking The Phone; Setting The Banner - Kyocera QCP-2760 - Qualcomm Cell Phone Quick Start Manual

Using keyguard

Keyguard protects your phone against
accidental keypresses when the phone
is turned on. You can answer calls by
pressing or
SEND
keyguard is turned on or not.
To turn keyguard on
Turn keyguard on in one of these ways:
Press and hold
[MENU] for about two seconds.
- or -
Press or
then press
1
the left Smart Key.
To turn keyguard off
Press or
1.
Press .
2. 1

Locking the phone

You can lock your phone using your
four-digit lock code. When the phone is
Quick Start Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
whether
TALK
or under
under [MENU],
. appears above
under .
locked, you can only call emergency
numbers or receive incoming calls.
To lock the phone
Press or
1.
Choose Security.
2.
Enter your four-digit lock code.
3.
Choose Lock Mode.
4.
Press or
5.
scroll through these settings: on
power up, now (resets to never
when you unlock), and never.
Press or
6.
select the setting you want to use.
To unlock the phone
Press or
[UNLOCK] and enter your lock
code.

Setting the banner

The banner is a 12-character display
that appears on the screen during
power up and standby.
under [MENU].
under [NEXT] to
under [OK] to
under
9