Omron SYSMAC C200HW-COM01 Operation Manual page 8

About this Manual:
This manual describes the installation and operation of the C200HW-COM01, C200HW-COM02-V1,
C200HW-COM03-V1, C200HW-COM04-EV1, C200HW-COM05-EV1, and C200HW-COM06-EV1
Communications Boards for the C200HX/C200HG/C200HE Programmable Controllers and includes the
sections described below. The manual is also written so that it can be used for the previous versions of
these Communications Boards even though some of the protocol macro functionality is not supported.
When using the Communications Boards, information in the following manuals will also be required. (Cat-
alog number suffixes have been omitted. Please be sure you have the most recent version of your manual
for your area. Contact your OMRON representative for more information.)
C200HW-ZW3PC1
Protocol Support Software
Operation Manual
SYSMAC WS01-PSTF1-E
Protocol Support Tool
SYSMAC-PST Operation
Manual
SYSMAC WS02-PSTC1-E
CX-Protocol Operation
Manual
C200HX/C200HG/C200HE
(-E/-ZE) Operation Manual
C200HX/C200HG/C200HE
Installation Guide
Please read this manual and the above related manuals carefully and be sure you understand the in-
formation provided before attempting to install and operate a Communications Board. Be sure to read
the precautions in the following section and understand the information contained before at-
tempting to set up or operate a PC system containing a Communications Board.
Section 1 Handling the Communications Board provides an outline of the functions of the Commu-
nications Boards, the installation method, the system configuration, and the system setup.
Section 2 Protocol Macro Function describes the protocol macro function supported by Communica-
tions Boards, and how to use the system protocol macros provided with the Protocol Support Software.
Troubleshooting is also described in this section.
The Appendices provide configuration information for various OMRON products and Hayes Modems.
These are as follows:
WARNING
!
Manual
Information on using the Software to
create protocol macros and information
on the system protocol macros.
Information on SYSMAC-PST, a
Windows-95-based software package
that supports the protocol macro
functionality of models
C200HW-COM04(-EV1) to
C200HW-COM06(-EV1).
Information on CX-Protocol, a
Windows-95/98-based software
package that supports the protocol
macro functionality of models
C200HW-COM04(-EV1) to
C200HW-COM06(-EV1),
CS1W-SCB21/41, and CS1W-SCU21.
Information on programming and
operating the PC.
Information required to install and
maintain PC hardware.
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.
Content Cat. No.
W305
W319
W344
W303
W302
ix