Auto Configuration Of 3G/Lte - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Auto Configuration of 3G/LTE

On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the
function for automatic creation of a mobile WAN connection upon powering the router on.
Figure 108. The Connections Setup / Auto Configuration of 3G/LTE page.
If you want to enable the function for automatic creation of a mobile WAN connection, click the
ENABLE button. If needed, change the settings on this page.
Parameter
Set as default gateway
Create without IMSI
After specifying the needed parameters, click the APPLY button.
Move the switch to the right to allow the router to use an
automatically created mobile WAN connection as the default
connection.
Move the switch to the left if you want the router to continue using
the existing default connection when automatically creating a
mobile WAN connection.
Move the switch to the right to enable automatic creation of a
mobile WAN connection without the operator's settings. This setting
will be useful if the code stored in the SIM card is unavailable.
Move the switch to the left to disable automatic creation of a mobile
WAN connection without the operator's settings.
Page 127 of 255
Configuring via Web-based Interface
Description