Table of Contents
Advertisement
Section 3 - Configuration
Auto Configuration is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP's server. Some ISPs
require you to change some settings on your side before your router can connect to the IPv6 Internet.
DNS Type:
Select either Obtain DNS server address or Use the following
DNS .
If you selected Use the following DNS address above, enter the
Primary DNS
Server:
Primary DNS Server address.
Secondary DNS
If you selected Use the following DNS address above, enter the
Server:
Secondary DNS Server address.
Enable DHCP-PD:
Enable or disable prefix delegation services.
LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for
the router.
LAN IPv6 Link-
Displays the router's LAN Link-Local Address.
Local Address:
Enable or disable the Automatic IPv6 Address Assignment
Enable Automatic
IPv6 Address
feature.
Assignment:
Enable or disable Automatic DHCP-PD in LAN services.
Enable Automatic
DHCP-PD in LAN:
Autoconfiguration
Select SLAAC + RDNSS, SLAAC + Stateless DHCP, or Stateful
DHCPv6.
Type:
Router
Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-882 User Manual
Auto Configuration
39
Advertisement
Table of Contents
