Creating 6In4 Wan Connection - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Creating 6in4 WAN Connection

!
Before configuring the connection, please first register on a tunnel broker's web site.
On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Parameter
Connection name
Enable connection
Ping
RIPng
Remote host
Client IPv6 address
Server IPv6 address
Figure 93. The page for creating a new 6in4 connection.
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the router responds to ping
requests from the external network through this connection. For
security reasons, it is recommended to disable this function.
Move the switch to the right to allow using RIPng for this
connection.
Enter the IPv4 address of the server provided by the tunnel broker.
Enter the IPv6 address of the router provided by the tunnel broker
(without specifying the prefix length).
Enter the IPv6 address of the server provided by the tunnel broker
(without specifying the prefix length).
Page 108 of 255
Configuring via Web-based Interface
Description