Table of Contents
Advertisement
Important Instructions
>
>
Notes on the Administrator Password
Administrator Password Has Not Been Set
Advisories and Warnings for Transporting or Storing the Printer
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Before transporting the printer, make sure that the print head is in the home (far right) position.
Notes on the Administrator Password
This printer allows you to set an administrator password to prevent unauthorized access or changes to the device
settings and network settings stored in the product when connecting to a network.
Default Value of the Administrator Password
The default value of the administrator password is printed on the label on the product itself, such as the one shown.
The position where the label is attached depends on the product, such as the side where the cover is opened, the
back, or the bottom.
The following illustration is an example of the label attachment position on the side of the printer where the cover
opens.
If both labels (1) and (2) are attached, the value next to PASSWORD written on the label in (1) is the default value.
In this example, the default value is 03212791.
If only label (2) is attached, the serial number printed on the label in (2) is the default value. In this example, the
default value is X3B8153559.
Administrator Password Has Not Been Set
Set a password on the password entry screen that is displayed when you access Web Config.
Related Information
"Running Web Config on a Web Browser" on page 374
&
18
Advertisement
Table of Contents
