Table of Contents
Advertisement
2 Overview
®
The Banner A-GAGE
MINI-ARRAY measuring light screen is ideal for applications such as on-the-fly product sizing and profiling, edge-
guiding and center-guiding, loop tensioning control, hole detection, parts counting, die ejection verification, and similar uses.
A typical MINI-ARRAY System consists of the following components:
•
Controller module
•
Emitter
•
Receiver
•
Two interconnecting cables
Sensors are available in array lengths from 6 inches to 4 feet (in 6 inch increments), plus 5 foot and 6 foot array models. Sensors are
available with either 9.5 mm (3/8 inch) or 19.1 mm (3/4 inch) beam spacing, which translates to either 32 or 16 beams per foot of array
length. Sensors with 3/8-inch beam spacing have a sensing range of up to 6 m (20 ft). Sensors with 3/4-inch beam spacing have a
sensing range of up to 17 m (55 ft); 5 ft and 6 ft arrays have shorter ranges.
Some typical MINI-ARRAY applications are:
Paint Booth Profiling
Inspection Applications
www.bannerengineering.com - Tel: 763.544.3164
®
®
A-GAGE
MINI-ARRAY
Measuring Light Screen System
Box Profiling
Edge Guiding
5
Advertisement
Table of Contents
