Table of Contents
Advertisement
CAMERA FIRMWARE UPDATE
C
AMERAS REQUIRING UPDATING
If RemoteStorage in the transfer-mode option of the setup menu
(A) is not displayed, the camera must be updated.
To check the Maxxum/Dynax 7D firmware version,
press the menu button, and then press the display
button.
The version is displayed under the camera name
(B). The version number is followed by "e" or "u" to
denote the product region. Press the central button
of the controller to close the screen.
If the camera has the 1.10 or later version, do not
update the firmware.
To update the camera firmware, a CompactFlash
card and a personal computer are necessary.
- 4 -
(A)
LCDbrightness
Transfer mode
Data storage
Video output
PTP
Audio signals
RemoteStorage
Language
Date/Time set
(B)
MAXXUM 7D
MAXXUM 7D
Ver. 1.00e
OK
Advertisement
Table of Contents
