Table of Contents
Advertisement
Q
UIT
Always turn the camera off before
quitting DiMAGE Transfer or opening
the preference window.
N
OTES
• Fast user switching may prevent DiMAGE Transfer from operating properly.
• System standby will not work until DiMAGE Transfer is closed.
• If the low-battery warning appears on the camera, DiMAGE Transfer cannot be used. The
computer and the camera are disconnect automatically after transferring the data.
• Use of the AC Adapter (sold separately) is recommended for extended use.
TAKING PICTURES
1. Turn the camera off. The main window changes as
shown. Confirm that the remaining frames counter
displays a dash and the preferences button is active.
2. Click the quit button in the lower right corner of the
main window.
1. Click "Preview" in the main window. The
preview window opens to the left of the main
window. The last image taken is displayed in
the window.
- 14 -
Advertisement
Table of Contents
