Manually Selecting An Ethernet Ip Address - Konica Minolta Magicolor 7300 Installation Manual

Manually Selecting an Ethernet IP Address

You must enter a unique IP address compatible with your local Ethernet
network environment.
Attention
You should always notify your network's administrator before changing
the printer's IP address.
1
Turn on your printer.
2
On the control panel, change the IP address of your printer
Press Key
Use the
Use the
Hold down the
the number quickly. When the key is released, the number stops
changing.
To quit changing the IP address, press the [Cancel] key.
36
(Until) Display Reads
READY
MAGICOLOR 7300
MAIN MENU
PRINT MENU
MAIN MENU
INTERFACE MENU
INTERFACE MENU
ETHERNET
ETHERNET
IP ADDRESS
IP ADDRESS
XXX.XXX.XXX.XXX
and keys to move to each of the four number triplets.
and keys to increase or decrease each number.
or key to automatically increase or decrease
IP ADDRESS
XXX.XXX.XXX.XXX
To immediately change the IP address, press the [Select]
key.
REBOOTING NOW
To exit the configuration menu, press the [Continue] key.
About the Control Panel