Installing The Toner Cartridges - Konica Minolta Magicolor 7300 Installation Manual

Konica minolta magicolor 7300: installation guide
Hide thumbs Also See for Magicolor 7300:
Table of Contents

Advertisement

WARNING!
If toner gets in your eyes, immediately flush them with water, and then
seek medical attention. For Material Safety Data Sheet (MSDS), visit
printer.konicaminolta.net/support (click on "Answer Base").

Installing the Toner Cartridges

Install the toner cartridges in the same colour sequence as the print units
(from right to left: yellow, magenta, cyan, and black). Be careful not to spill
toner while installing a toner cartridge.
1
Remove the yellow toner cartridge from its packaging.
2
To loosen the toner inside the
cartridge, vigorously shake the
toner cartridge horizontally 10 or
more times.
Attention
Do not shake the toner cartridge vertically. Be careful not to hold the
toner cartridge by its shutter.
3
Next, to distribute the toner evenly
inside the cartridge, gently shake
the toner cartridge horizontally a
few more times.
Setting up Your Printer
19

Advertisement

Table of Contents
loading

Table of Contents