Rigging; D, E Sizes - Carrier 19XRV Start-Up And Service Instructions

With pic 6 controls danfoss vlt fc102

Hide thumbs Also See for 19XRV:

Table of Contents

Rigging

Drive enclosure and associated components are heavy. To avoid

injury be sure to use appropriate equipment with appropriate

weight ratings for lifting. Always use dedicated lifting eyes for

lifting and never walk under suspended load. Wear PPE such as

gloves, safety glasses and safety shoes to prevent injury. Ensure

correct length of lifting cables so lifting angle is 65 degrees or

larger with horizontal (Fig. 6). Always use lifting eye bolts (Fig. 7)

to rig drive if it needs to be removed from the chiller. Note that

E series drives are placed on the chiller in horizontal position and

will need to be rigged from that orientation using rigging eyes in

the four corners.

Fig. 7 — Installation of Eye Bolts

Fig. 6 — Lifting Cables

Table of Contents