Charging The Battery Pack; D Using The Bc-213 Rapid Charger - Icom IC-T10 Advanced Manual

Vhf/uhf dual band transceiver
Hide thumbs Also See for IC-T10:
Table of Contents

Advertisement

1
BATTERY CHARGING

Charging the battery pack

D Using the BC-213 rapid charger

Before using the transceiver for the first time, the
battery pack must be fully charged for optimum life
and operation.
Charging note
• CAUTION: DO NOT use a battery pack or charger
that are not manufactured or approved by Icom.
• BE SURE to turn OFF the transceiver. When the
transceiver's power cannot be turned OFF because
of the battery exhaustion, detach the battery pack
from the transceiver. Then charge the battery pack
by itself.
• If the charging indicator blinks orange, there may
be a problem with the battery pack or charger.
Contact your dealer if you have problems charging
a new battery pack.
Charging time:
Approximately 4 hours for the BP-280
Power
adapter*
(BC-242)
The CP-23L (for a
12 V cigarette lighter
socket) can be used
instead of the power
adapter.
* May not be supplied, or the shape may be different,
depending on the transceiver version.
1-3
Turn OFF
Battery
pack
(BP-280)
Charging indicator
Lights orange:
Charging
Lights green:
Fully charged

Advertisement

Table of Contents
loading

Table of Contents