Konica Minolta Magicolor 2300 DL Installation Manual page 20

Press Key
Selecting an Ethernet IP Address
You must enter a unique IP address compatible with your local Ethernet net-
work environment.
When manually setting the IP address, turn off DHCP and BOOTP
first.
Attention
You should always notify your network administrator before changing
the printer's IP address.
IP ADDRESS, SUBNET MASK and GATEWAY are displayed only when both
DHCP and BOOTP are set to off.
1
Turn on your printer
2
On the control panel, change the IP address of your printer:
Press Key
16
(Until) Display Reads
LANGUAGE SET/ENGLISH
Press the Right or Left key until the appropriate
language is displayed.
<LANGUAGE> is selected.
Press the Up key to return to IDLE.
(Until) Display Reads
IDLE/MAGICOLOR 2300DL
MENU/LANGUAGE
Press the Right or Left key until MENU/
NETWORK is displayed.
About the Control Panel