Konica Minolta Magicolor 2300 DL Installation Manual page 14

Check http://printer.konicaminolta.net/support (click on Answer Base) for
currently approved media. To order approved media, go to www.q-shop.com.
For information about loading different types of media, refer to "Using Media"
in the User's Guide.
Attention
Do not mix media types/sizes in the media trays.
1
Adjust the media guides to fit the size of
media that you are loading.
Squeeze the front media guide and open
the media guides.
2
Fan a stack of approximately
200 sheets of media.
3
Load the media face up, short
edge first.
Often, an arrow on the media package
label indicates the face-up (printing) side
of the paper.
A fill limit mark is provided on
the inside of the media guides.
Tray 1 holds 200 sheets of 22 lb bond (80 g/m²) paper.
4
Adjust the media guides to fit the media.
Attention
Always adjust the media guides after inserting the media. Guides
that are not properly adjusted can cause poor print quality, media
jams, or printer damage.
10 Setting up Your Printer