Air Cleaner Details View - Kohler CV11-16 Service Manual

b. Grasp the cross shaft with a pliers and turn the
shaft couterclockwise as far as it will go, then
tighten the hex. nut securely. See Figure 11-66.
Figure 11-66. Adjusting the Governor.
Original Design
Figure 11-67. Air Cleaner Details.
Governor
Lever
Governor Shaft
5. Be sure the rubber sleeve seal is installed on the
air cleaner base stud. Install the air cleaner
element and precleaner. Secure the element with
the wing nut. See Figure 11-67.
Knob (Part
of Cover)
Air Cleaner
Cover
Open Base
Later Design
Section 11
Reassembly
Air Duct
Inner Air
Cleaner Seal
11
Air Cleaner
Base Seal
Closed Base
11.21