Routing to Each Loudspeaker Individually
Use this method when:
•
Signal comes from device with Brooklyn II chip, such as a P300 or
•
Signal comes from device with Ultimo chip transmitting in multicast
Learn more about Dante flows in our FAQs
If you're using a Shure P300 or other devices with high unicast Dante flow limits, route a signal to each loudspeaker individual-
ly using Designer or Dante Controller.
Routing Signals from Loudspeaker to Loudspeaker
Use this method when:
•
Signal comes from device with Ultimo chip transmitting in unicast, such as Shure ANI
Learn more about Dante flows in our FAQs
If you encounter unicast Dante flow limits, route from one loudspeaker to another using the Dante output channel.
or from Audinate.
or from Audinate.
Shure Incorporated
14/26