How To Update Firmware Using Designer; Firmware Versioning; Systemon Compatibility; Loudspeaker Dante Channels - Shure Microflex MXN5W-C Manual

Networked ceiling loudspeaker
Table of Contents

Advertisement

To access your device in Designer:
1.
Download and install Designer on a computer connected to the same network as your device.
2.
Open Designer, and check that you're connected to the correct network in Settings.
3.
Click Online devices. A list of online devices appears.
4.
To identify devices, click the product icon to flash the lights on a device. Select your device in the list and click Config-
ure to control device settings.
Learn more at shure.com/designer.
You can also access device settings using

How to Update Firmware Using Designer

Applies to Designer 4.2 and newer.
Before setting up devices, check for firmware updates using Designer to take advantage of new features and improvements.
You can also install firmware using
To update:
1.
Open Designer. If there's new firmware that you haven't downloaded yet, Designer shows a banner with the number of
updates available. Click to download firmware.
2.
Go to Online devices and find your devices.
3.
Choose a firmware version for each device from the Available firmware column. Make sure that no one is editing device
settings during an update.
4.
Select the checkbox next to each device you plan to update and click Update firmware. Devices may disappear from
Online devices during an update. Don't close Designer while updating firmware.

Firmware Versioning

When updating firmware, update all hardware to the same firmware version to ensure consistent operation.
The firmware of all devices has the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the network,
must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x).

SystemOn Compatibility

You can monitor and manage this device using Shure SystemOn software. Install SystemOn to:
Remotely monitor Shure devices across networks
Receive real-time alerts about critical issues, such as low batteries or missing transmitters
Control access to devices with user profiles
Learn more at shure.com.

Loudspeaker Dante Channels

The loudspeaker has 2 Dante input channels and 1 Dante output channel.
Shure Web Device
Discovery.
Shure Update Utility
for most products.
Shure Incorporated
12/26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microflex mxn5-c

Table of Contents