Table of Contents
Advertisement
6.
Attach the magnetic grille to the loudspeaker. The Shure logo is also magnetic, so you can reposition or remove it if
necessary.
Connecting to Power
This device requires Power over Ethernet Plus (PoE+) or PoE to power it.
Use one of the following to provide PoE+ or PoE:
•
Network switch with PoE+ or PoE
•
PoE+ or PoE injector device
The PoE/PoE+ source must also be a gigabit device.
Status LED Behavior
LED Behavior
Solid green, then off
Green flashing for 30 seconds
After 4 seconds, green flashing
Green flashing after 4 seconds, green solid after 8 sec-
onds
Device State
Device powering on
Device identify
Network reset
Full factory reset
Shure Incorporated
10/26
Advertisement
Table of Contents
