Painting The Grille; Reset Button; Controlling Devices With Shure Designer Software - Shure Microflex MXN5W-C Manual

LED Behavior
Red
Solid amber

Painting the Grille

You can paint the loudspeaker's grille to match the surroundings. For best results:
• Use a professional painting house.
• Only paint the grille after removing it from the loudspeaker.
• Remove the magnetic Shure logo before painting.

Reset Button

To access the reset button, remove the grille.
There are 2 hardware reset options:
Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults. Power LED flashes green.
Full factory reset (press button for longer than 8 seconds)
Resets all network and Designer settings to the factory defaults. Power LED flashes green, then solid green after 8 sec-
onds.

Controlling Devices with Shure Designer Software

To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au-
dio coverage for installations using MXA microphones and other Shure networked devices.
Device State
Error (Check event log for details)
Firmware update in progress
Shure Incorporated
11/26