Routing Signals To Multiple Loudspeakers; Routing To Each Loudspeaker Individually - Shure Microflex MXN5-C User Manual

Routing Signals to Multiple Loudspeakers

In rooms with multiple loudspeakers installed, you can route a signal from one loudspeaker to another using the Dante output
channel, or you can route the signal to each loudspeaker individually.

Routing to Each Loudspeaker Individually

Use this method when:
• Signal comes from device with Brooklyn II chip, such as a P300 or
• Signal comes from device with Ultimo chip transmitting in multicast
Learn more about Dante flows in our FAQs
If you're using a Shure P300 or other devices with high unicast Dante flow limits, route a signal to each loudspeaker individual­
ly using Designer or Dante Controller.
or from Audinate.
Shure Incorporated
14/24