Kodak i1220 Plus Reference Manual

Cleaning the imaging area
Indicator Lights and Error Codes
When an error occurs, the red indicator will blink
and one of the following codes will be displayed in
the Function window.
Code Problem
E 0 USB cable is Be sure the USB cable is
not connected securely connected to the
scanner and PC.
E 1 - E 5 Scanner failure Turn the scanner off, then
on again. Restart the
E 7; E 8
scanning application and
try again. If the problem
persists, contact Kodak
Service.
E 6 Scanner cover Close the scanner cover.
open
E 9 Document jam Open the scanner and
remove any paper in the
paper path.
Supplies and Accessories
CAT No. Description
148 4864 Kodak Feed Rollers
173 6115 Kodak Separation Module
826 9607 Kodak Feed Module
853 5981 Kodak Roller Cleaning Pads
169 0783 Kodak Transport Cleaning Sheets
896 5519 Staticide Wipes for Kodak Scanners
868 3724 Optics Cleaner Pad
892 7717 Kodak White Background Accessory
867 7288 Kodak A4 Flatbed Accessory
863 6870 Kodak Black Background Accessory for A4
179 6747 Kodak A3 Flatbed Accessory
EASTMAN KODAK COMPANY
343 State Street
Rochester, New York 14650 U.S.A.
A-61631 / Part #8F9723 June, 2009
© Eastman Kodak Company, 2009
TM: Kodak
Remedy
i1200/i1300 Plus Series Scanners
www.kodak.com/go/disupport
1.800.822.1414
(US&C only; all other regions, contact your local
Kodak Support Center)
When contacting support, have the following available:
A description of your problem
•
Scanner model and serial number
•
Computer configuration
•
Software application you are using
•
Reference Guide
Kodak Service & Support